उत्पाद वर्णन
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
उत्पाद वर्णन
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
उत्पाद विनिर्देश
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
पैकेजिंग और शिपिंग
कंपनी प्रोफाइल
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
अक्सर पूछे जाने वाले प्रश्न
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.HOE LONG IS YOUR DELIVERY TIME AND SHIPMENT?
30-45days.
Other Products
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| प्रकार: | Pto Shaft |
|---|---|
| उपयोग: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| सामग्री: | 45cr Steel |
| उदाहरण: |
US$ 20/Piece
1 पीस (न्यूनतम ऑर्डर) | Order Sample |
|---|
| अनुकूलन: |
उपलब्ध
| अनुकूलित अनुरोध |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What maintenance practices are essential for prolonging the lifespan of PTO drive shafts?
To prolong the lifespan and ensure the optimal performance of PTO (Power Take-Off) drive shafts, regular maintenance practices are essential. By following these maintenance practices, operators can prevent premature wear, identify potential issues early on, and maximize the longevity of the drive shaft. Here are some key maintenance practices to consider:
1. Lubrication:
Proper lubrication is crucial for the smooth operation and longevity of PTO drive shafts. Regularly lubricate the drive shaft’s universal joints, splines, and other moving parts as per the manufacturer’s recommendations. Choose a high-quality lubricant suitable for the specific application and environmental conditions. Lubrication helps reduce friction, prevent excessive wear, and protect against corrosion.
2. Inspection:
Regular visual inspections are important for identifying any signs of wear, damage, or misalignment in the PTO drive shaft. Inspect the drive shaft and its components for cracks, dents, loose bolts, or signs of excessive wear. Pay attention to the universal joints, splines, shielding, and safety features. If any issues are detected, take prompt action to rectify them to prevent further damage and ensure safe operation.
3. Torque Checks:
Periodically check the torque on fasteners, such as bolts and nuts, that secure the PTO drive shaft and its components. Vibrations and normal operation can cause these fasteners to loosen over time, potentially leading to misalignment or damage. Use a torque wrench to ensure that the fasteners are properly tightened according to the manufacturer’s specifications. Regular torque checks help maintain the integrity and stability of the drive shaft assembly.
4. Alignment:
Maintaining proper alignment between the PTO drive shaft, the primary power source, and the implement is essential for efficient power transfer and preventing excessive wear. Check the alignment of the drive shaft regularly, ensuring that it is straight and properly seated in its connections. Misalignment can cause vibration, increased stress, and premature failure. Make adjustments as necessary to achieve proper alignment.
5. Shear Pin or Torque Limiter Replacement:
If the PTO drive shaft is equipped with a shear pin or torque limiter as a safety feature, it is important to replace these components when they have been activated or damaged. Shear pins are sacrificial components that break under excessive torque, protecting the drive shaft and connected equipment. Replace the shear pin or torque limiter with the correct type and specifications recommended by the manufacturer to ensure continued safety and proper function.
6. Shielding and Guarding:
Inspect the shielding and guarding of the PTO drive shaft regularly to ensure they are intact and in good condition. These protective covers are designed to prevent contact with moving parts and reduce the risk of entanglement or injury. Replace any damaged or missing shielding promptly to maintain operator safety and prevent debris from entering the drive shaft assembly.
7. Environmental Protection:
Consider the environmental conditions in which the PTO drive shaft operates and take appropriate measures to protect it. If the drive shaft is exposed to moisture, dirt, or corrosive substances, clean it regularly and apply appropriate coatings or protective measures to prevent rust and corrosion. Additionally, ensure that the drive shaft is stored in a dry and clean environment when not in use.
8. Manufacturer’s Guidelines:
Follow the maintenance guidelines provided by the manufacturer of the PTO drive shaft. These guidelines may include specific maintenance intervals, recommended lubricants, torque specifications, and other important instructions. Adhering to the manufacturer’s guidelines ensures that the drive shaft is maintained in accordance with its design and engineering specifications, maximizing its lifespan and performance.
By implementing these essential maintenance practices, operators can significantly prolong the lifespan of PTO drive shafts. Regular lubrication, inspections, torque checks, alignment checks, timely replacement of safety features, proper shielding and guarding, environmental protection, and adherence to manufacturer’s guidelines all contribute to the drive shaft’s longevity, reliability, and safe operation.
पीटीओ ड्राइव शाफ्ट के साथ काम करते समय किन सुरक्षा सावधानियों का पालन किया जाना चाहिए?
पीटीओ (पावर टेक-ऑफ) ड्राइव शाफ्ट के साथ काम करते समय दुर्घटनाओं से बचाव और उपकरण चलाने या उसकी मरम्मत करने वाले व्यक्तियों की सुरक्षा सुनिश्चित करने के लिए सुरक्षा सावधानियों का कड़ाई से पालन करना आवश्यक है। पीटीओ ड्राइव शाफ्ट के साथ काम करते समय पालन की जाने वाली कुछ महत्वपूर्ण सुरक्षा सावधानियां इस प्रकार हैं:
1. निर्माता के निर्देशों को पढ़ें और समझें:
पीटीओ ड्राइव शाफ्ट के साथ काम करने से पहले, निर्माता के निर्देशों, संचालन मैनुअल और सुरक्षा दिशानिर्देशों को ध्यानपूर्वक पढ़ें और समझें। उपयोग किए जा रहे पीटीओ ड्राइव शाफ्ट मॉडल की विशिष्ट आवश्यकताओं और अनुशंसाओं से खुद को परिचित करें। निर्माता के निर्देश स्थापना, संचालन, रखरखाव और सुरक्षा सावधानियों के संबंध में आवश्यक जानकारी प्रदान करते हैं।
2. उपयुक्त व्यक्तिगत सुरक्षा उपकरण (पीपीई) पहनें:
पीटीओ ड्राइव शाफ्ट के साथ काम करते समय हमेशा आवश्यक व्यक्तिगत सुरक्षा उपकरण (पीपीई) पहनें। इसमें सुरक्षा चश्मे, सुरक्षात्मक दस्ताने, स्टील-टो वाले जूते और उपयुक्त कपड़े शामिल हो सकते हैं। पीपीई उड़ने वाले मलबे, उलझने या घूमने वाले पुर्जों के संपर्क जैसे संभावित खतरों से सुरक्षा प्रदान करता है।
3. उचित स्थापना और संरेखण सुनिश्चित करें:
पीटीओ ड्राइव शाफ्ट के लिए अनुशंसित स्थापना प्रक्रियाओं का पालन करें। सुनिश्चित करें कि यह सही ढंग से संरेखित है और बिजली स्रोत और संचालित उपकरण दोनों से मजबूती से जुड़ा हुआ है। गलत स्थापना या गलत संरेखण से अत्यधिक कंपन, समय से पहले घिसाव और संचालन के दौरान ड्राइव शाफ्ट के संभावित विस्थापन का खतरा हो सकता है।
4. सुरक्षा गार्ड और शील्ड का उपयोग करें:
पीटीओ ड्राइव शाफ्ट पर उचित सुरक्षा गार्ड और शील्ड लगे होने चाहिए। ये सुरक्षा उपकरण घूमने वाले पुर्जों से आकस्मिक संपर्क को रोकने और उलझने के जोखिम को कम करने में मदद करते हैं। सुनिश्चित करें कि गार्ड और शील्ड सही ढंग से लगे हों और अच्छी कार्यशील स्थिति में हों। संचालन के दौरान इन्हें न हटाएं या इनके बिना काम न करें।
5. ढीले कपड़े, गहने और बालों से बचें:
पीटीओ ड्राइव शाफ्ट के साथ काम करते समय, ढीले कपड़े, गहने या लंबे बाल रखने से बचें जो घूमने वाले पुर्जों में उलझ सकते हैं। ऐसी किसी भी ढीली वस्तु को सुरक्षित कर लें या हटा दें जिससे उलझने का खतरा हो या जो संचालन के दौरान ड्राइव शाफ्ट में फंस सकती हो।
6. रखरखाव से पहले बिजली कनेक्शन काट दें:
पीटीओ ड्राइव शाफ्ट पर किसी भी प्रकार की मरम्मत या निरीक्षण करने से पहले, सुनिश्चित करें कि बिजली का स्रोत पूरी तरह से बंद है और उपकरण पूरी तरह से रुका हुआ है। बिजली की आपूर्ति को डिस्कनेक्ट करें और आकस्मिक रूप से चालू होने से रोकने के लिए उचित उपाय करें, जैसे कि बिजली के स्रोत को लॉक करना और टैग करना।
7. ड्राइव शाफ्ट का नियमित रूप से निरीक्षण और रखरखाव करें:
पीटीओ ड्राइव शाफ्ट की नियमित रूप से जांच करें ताकि घिसावट, क्षति या संरेखण में गड़बड़ी के कोई संकेत न मिलें। ढीले या गायब पुर्जों की जांच करें और सुनिश्चित करें कि सभी फास्टनर और कनेक्शन सुरक्षित हैं। निर्माता द्वारा अनुशंसित तरीके से ड्राइव शाफ्ट को लुब्रिकेट करें। आगे की क्षति या संभावित सुरक्षा खतरों से बचने के लिए किसी भी रखरखाव या मरम्मत की आवश्यकता होने पर तुरंत ध्यान दें।
8. अत्यधिक भार और झटके से सावधान रहें:
पीटीओ ड्राइव शाफ्ट पर उसकी निर्धारित क्षमता से अधिक भार या अचानक झटके न डालें। अधिक भार डालने से शाफ्ट जल्दी घिस सकता है, पुर्जे खराब हो सकते हैं और दुर्घटनाएं हो सकती हैं। सुनिश्चित करें कि पीटीओ ड्राइव शाफ्ट द्वारा संचालित उपकरण अनुशंसित भार सीमा से अधिक भार न डालें।
9. प्रशिक्षण और जागरूकता प्रदान करें:
यह सुनिश्चित करें कि पीटीओ ड्राइव शाफ्ट के साथ या उसके आसपास काम करने वाले व्यक्तियों को उचित प्रशिक्षण मिले और वे इससे जुड़े जोखिमों और सुरक्षा सावधानियों से अवगत हों। प्रशिक्षण में स्थापना प्रक्रिया, सुरक्षित संचालन, रखरखाव विधियाँ और आपातकालीन प्रक्रियाएँ शामिल होनी चाहिए। सुरक्षा के प्रति जागरूक संस्कृति को बढ़ावा दें और सुरक्षा संबंधी किसी भी चिंता या घटना की रिपोर्ट करने के लिए प्रोत्साहित करें।
10. आवश्यकता पड़ने पर पेशेवर सहायता लें:
यदि आपको पीटीओ ड्राइव शाफ्ट के साथ काम करने के किसी भी पहलू के बारे में कोई शंका है या जटिल रखरखाव या मरम्मत की आवश्यकता है, तो पेशेवर सहायता लें। योग्य तकनीशियनों, इंजीनियरों या उपकरण निर्माता से परामर्श करने से यह सुनिश्चित करने में मदद मिल सकती है कि काम सुरक्षित और प्रभावी ढंग से किया जाए।
ध्यान रखें, पीटीओ ड्राइव शाफ्ट के साथ काम करते समय सुरक्षा हमेशा सर्वोपरि होनी चाहिए। इन सावधानियों का पालन करने से दुर्घटनाओं, चोटों और उपकरण क्षति के जोखिम को कम करने में मदद मिलती है। सतर्क रहना, सावधानी बरतना और संबंधित सुरक्षा नियमों और मानकों का पालन करना आवश्यक है।
What benefits do PTO drive shafts offer for various types of machinery?
PTO (Power Take-Off) drive shafts offer several benefits for various types of machinery in agricultural and industrial applications. They play a critical role in transferring power from a primary power source, such as a tractor or engine, to different types of machinery and equipment. Here’s a detailed explanation of the benefits provided by PTO drive shafts:
1. Versatility:
PTO drive shafts enhance the versatility of machinery by allowing them to be powered by a wide range of power sources. Tractors, engines, or other primary power sources can be used to provide rotational power, which can then be transferred through the PTO drive shaft to different types of machinery. This versatility enables the same power source to be utilized for various tasks and applications.
2. Increased Efficiency:
By utilizing a PTO drive shaft, machinery can tap into the power generated by a primary power source, such as a tractor’s engine, without the need for a separate engine or power supply. This eliminates the need for additional fuel consumption and maintenance associated with multiple power sources, leading to increased overall efficiency and reduced operating costs.
3. Cost-Effectiveness:
PTO drive shafts offer a cost-effective solution for powering machinery. Instead of investing in separate engines or power units for each piece of equipment, machinery can be directly connected to a primary power source with the use of a PTO drive shaft. This reduces the capital investment required for additional power sources and improves cost efficiency in the long run.
4. Ease of Installation and Operation:
PTO drive shafts are designed for easy installation and operation. They typically feature a standardized connection system, allowing for quick and simple attachment to the power source and machinery. This ease of installation and operation saves time and effort during equipment setup and ensures smooth integration between the power source and machinery.
5. Flexibility and Interchangeability:
PTO drive shafts offer flexibility and interchangeability between different implements and machinery. As long as the machinery has a compatible PTO input connection, it can be easily connected to the PTO drive shaft. This allows for quick swapping of implements and machinery, making it convenient to adapt to changing tasks and operational requirements.
6. Power Adjustability:
PTO drive shafts provide the ability to adjust the power output to machinery. Tractors or power sources typically have multiple PTO speed settings, allowing operators to match the rotational speed and power requirements of the machinery being driven. This adjustability ensures optimal performance and prevents damage to the machinery due to excessive or insufficient power.
7. Maintenance and Safety:
PTO drive shafts generally require less maintenance compared to separate engines or power units. They are designed for durability and reliability, with proper lubrication and periodic inspection being the main maintenance requirements. Additionally, PTO drive shafts can be equipped with safety features such as guards or shields to protect operators from potential hazards associated with rotating components.
8. Compatibility with Various Machinery:
PTO drive shafts are compatible with a wide range of machinery and equipment used in agricultural and industrial applications. They can power different types of implements, such as mowers, balers, tillers, harvesters, pumps, and generators, making them suitable for various tasks and industries.
Overall, PTO drive shafts offer numerous benefits for various types of machinery. They enhance versatility, increase efficiency, reduce costs, and provide ease of installation and operation. With their flexibility, adjustability, and compatibility, PTO drive shafts play a vital role in powering machinery and improving overall productivity in agricultural and industrial operations.
editor by CX 2024-01-25
