Περιγραφή προϊόντος
Πιστοποιητικό CE Ανταλλακτικά θεριζοαλωνιστικών μηχανών πατάτας Cardan Άξονας κίνησης Pto και άξονας Pto αγροτικού τρακτέρ
Περιγραφή προϊόντος
Ένας άξονας λήψης ισχύος (άξονας PTO) είναι μια μηχανική συσκευή που χρησιμοποιείται για τη μετάδοση ισχύος από ένα τρακτέρ ή άλλη πηγή ενέργειας σε ένα προσαρτημένο μηχάνημα, όπως ένα χλοοκοπτικό, ένα σκαπτικό ή μια πρέσα χορτοκοπτικού. Συνήθως τοποθετημένος στο πίσω μέρος του τρακτέρ, ο άξονας PTO κινείται από τον κινητήρα του τρακτέρ μέσω του κιβωτίου ταχυτήτων.
Ο κύριος σκοπός του άξονα PTO είναι να παρέχει μια περιστρεφόμενη πηγή ενέργειας στο παρελκόμενο, επιτρέποντάς του να εκτελεί την προβλεπόμενη λειτουργία του. Για τη σύνδεση του παρελκόμενου με τον άξονα PTO, χρησιμοποιείται μια αρθρωτή άρθρωση, η οποία επιτρέπει την κίνηση μεταξύ του τρακτέρ και του παρελκόμενου, διατηρώντας παράλληλα μια συνεπή μεταφορά ισχύος.
Εδώ είναι τα πλεονεκτήματά μας σε σύγκριση με παρόμοια προϊόντα από την Κίνα:
1. Οι σφυρήλατοι ζυγοί καθιστούν τους άξονες PTO αρκετά ισχυρούς για χρήση και εργασία.
2. Εσωτερικά μεγέθη πρότυπα για να επιβεβαιώσετε την ομαλή εγκατάσταση.
3. Πιστοποιητικά CE και ISO για την εγγύηση της ποιότητας των προϊόντων μας.
4.Strong και επαγγελματική συσκευασία για να επιβεβαιώσετε την καλή κατάσταση όταν λαμβάνετε τα αγαθά.
Προδιαγραφές προϊόντος
Στη γεωργία, ο πιο συνηθισμένος τρόπος μετάδοσης ισχύος από ένα τρακτέρ σε ένα παρελκόμενο είναι μέσω ενός συστήματος μετάδοσης κίνησης, που συνδέεται με τον PTO (Power Take Off) του τρακτέρ στο IIC (Implement Input Connection). Τα συστήματα μετάδοσης κίνησης συνδέονται επίσης συνήθως με άξονες εντός του παρελκόμενου για τη μετάδοση ισχύος σε διάφορους μηχανισμούς.
Διατίθενται οι ακόλουθες διαστάσεις των τύπων PTO.
Τύπος Β: 13/8″Z6 (540 λεπτά)
Τύπος D: 13/8″Z21 (1000 λεπτά)
Η σύνδεση ενός συστήματος μετάδοσης κίνησης σε ένα δυναμοδότη (PTO) θα πρέπει να είναι γρήγορη και απλή, επειδή σε κανονική χρήση τα τρακτέρ πρέπει να χειρίζονται πολλά παρελκόμενα. Συνεπώς, οι ζυγοί στο άκρο του συστήματος μετάδοσης κίνησης που βρίσκεται στο τρακτέρ είναι εξοπλισμένοι με ένα σύστημα γρήγορης αποσύνδεσης, όπως πείρος ώθησης ή κολάρο με σφαιρική ράβδο.
Οι προδιαγραφές για ένα σύστημα μετάδοσης κίνησης, συμπεριλαμβανομένου του τρόπου σύνδεσής του με ένα δυναμοδότη (PTO), εξαρτώνται από το CZPT του παρελκομένου.
Οι ζυγοί στην πλευρά της LLC σπάνια αποσυνδέονται και μπορούν να στερεωθούν με συνδέσμους ταχείας ασφάλισης (πείρος ή κολάρο με μπίλια).
Οι κωνικοί πείροι είναι η πιο σταθερή σύνδεση για τους άξονες με αυλακώσεις και χρησιμοποιούνται συνήθως σε ζυγούς και περιοριστές ροπής. Οι κωνικοί πείροι χρησιμοποιούνται επίσης συχνά για τη σύνδεση εσωτερικών άξονων κίνησης σε γραμμές μετάδοσης κίνησης που δεν αποσυνδέονται συχνά.
Ο περιοριστής ροπής και οι συμπλέκτες πρέπει πάντα να εγκαθίστανται στην πλευρά του παρελκομένου του κύριου συστήματος μετάδοσης κίνησης.
Συσκευασία & Αποστολή
Προφίλ Εταιρείας
Η HangZhou Hanon Technology Co., Ltd είναι μια σύγχρονη επιχείρηση που ειδικεύεται στην ανάπτυξη, παραγωγή, πωλήσεις και υπηρεσίες γεωργικών εξαρτημάτων όπως άξονας PTO και κιβώτια ταχυτήτων, καθώς και υδραυλικών εξαρτημάτων όπως κύλινδροι, βαλβίδες, γραναζωτές αντλίες και κινητήρες κ.λπ.
Τηρούμε την αρχή της «Υψηλής Ποιότητας, Ικανοποίησης Πελατών», χρησιμοποιώντας προηγμένη τεχνολογία και εξοπλισμό για να διασφαλίσουμε όλα τα τεχνικά πρότυπα μετάδοσης. Ακολουθούμε την αρχή της προτεραιότητας των ανθρώπων, προσπαθώντας να δημιουργήσουμε ένα ευχάριστο περιβάλλον και μια πλατφόρμα απόδοσης για κάθε εργαζόμενο. Έτσι, όλοι μπορούν να είναι συνειδητά ενεργοί για να ενταχθούν στην Hanon Machinery.
Συχνές ερωτήσεις
1.WHAT’S THE PAYMENT TERM?
Όταν σας κάνουμε προσφορά, θα επιβεβαιώσουμε μαζί σας τον τρόπο συναλλαγής, FOB, CIF κ.λπ.<br> Για προϊόντα μαζικής παραγωγής, πρέπει να πληρώσετε προκαταβολή 30% πριν από την παραγωγή και το υπόλοιπο 70% έναντι αντιγράφου εγγράφων. Ο πιο συνηθισμένος τρόπος είναι με T/T.
2.HOW TO DELIVER THE GOODS TO US?
Συνήθως θα σας στείλουμε τα αγαθά δια θαλάσσης.
3.HOE LONG IS YOUR DELIVERY TIME AND SHIPMENT?
30-45days.
Άλλα προϊόντα
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Τύπος: | Pto Shaft |
|---|---|
| Χρήση: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| Υλικό: | 45cr Steel |
| Δείγματα: |
US$ 20/τεμάχιο
1 τεμάχιο (ελάχιστη παραγγελία) | Δείγμα παραγγελίας |
|---|
| Προσαρμογή: |
Διαθέσιμος
| Προσαρμοσμένο Αίτημα |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Κόστος αποστολής:
Εκτιμώμενο φορτίο ανά μονάδα. |
σχετικά με το κόστος αποστολής και τον εκτιμώμενο χρόνο παράδοσης. |
|---|
| Μέθοδος Πληρωμής: |
|
|---|---|
|
Αρχική πληρωμή Πλήρης πληρωμή |
| Νόμισμα: | US$ |
|---|
| Επιστροφές & Επιστροφές Χρημάτων: | Μπορείτε να υποβάλετε αίτηση για επιστροφή χρημάτων έως και 30 ημέρες μετά την παραλαβή των προϊόντων. |
|---|
What maintenance practices are essential for prolonging the lifespan of PTO drive shafts?
To prolong the lifespan and ensure the optimal performance of PTO (Power Take-Off) drive shafts, regular maintenance practices are essential. By following these maintenance practices, operators can prevent premature wear, identify potential issues early on, and maximize the longevity of the drive shaft. Here are some key maintenance practices to consider:
1. Lubrication:
Proper lubrication is crucial for the smooth operation and longevity of PTO drive shafts. Regularly lubricate the drive shaft’s universal joints, splines, and other moving parts as per the manufacturer’s recommendations. Choose a high-quality lubricant suitable for the specific application and environmental conditions. Lubrication helps reduce friction, prevent excessive wear, and protect against corrosion.
2. Inspection:
Regular visual inspections are important for identifying any signs of wear, damage, or misalignment in the PTO drive shaft. Inspect the drive shaft and its components for cracks, dents, loose bolts, or signs of excessive wear. Pay attention to the universal joints, splines, shielding, and safety features. If any issues are detected, take prompt action to rectify them to prevent further damage and ensure safe operation.
3. Torque Checks:
Periodically check the torque on fasteners, such as bolts and nuts, that secure the PTO drive shaft and its components. Vibrations and normal operation can cause these fasteners to loosen over time, potentially leading to misalignment or damage. Use a torque wrench to ensure that the fasteners are properly tightened according to the manufacturer’s specifications. Regular torque checks help maintain the integrity and stability of the drive shaft assembly.
4. Alignment:
Maintaining proper alignment between the PTO drive shaft, the primary power source, and the implement is essential for efficient power transfer and preventing excessive wear. Check the alignment of the drive shaft regularly, ensuring that it is straight and properly seated in its connections. Misalignment can cause vibration, increased stress, and premature failure. Make adjustments as necessary to achieve proper alignment.
5. Shear Pin or Torque Limiter Replacement:
If the PTO drive shaft is equipped with a shear pin or torque limiter as a safety feature, it is important to replace these components when they have been activated or damaged. Shear pins are sacrificial components that break under excessive torque, protecting the drive shaft and connected equipment. Replace the shear pin or torque limiter with the correct type and specifications recommended by the manufacturer to ensure continued safety and proper function.
6. Shielding and Guarding:
Inspect the shielding and guarding of the PTO drive shaft regularly to ensure they are intact and in good condition. These protective covers are designed to prevent contact with moving parts and reduce the risk of entanglement or injury. Replace any damaged or missing shielding promptly to maintain operator safety and prevent debris from entering the drive shaft assembly.
7. Environmental Protection:
Consider the environmental conditions in which the PTO drive shaft operates and take appropriate measures to protect it. If the drive shaft is exposed to moisture, dirt, or corrosive substances, clean it regularly and apply appropriate coatings or protective measures to prevent rust and corrosion. Additionally, ensure that the drive shaft is stored in a dry and clean environment when not in use.
8. Manufacturer’s Guidelines:
Follow the maintenance guidelines provided by the manufacturer of the PTO drive shaft. These guidelines may include specific maintenance intervals, recommended lubricants, torque specifications, and other important instructions. Adhering to the manufacturer’s guidelines ensures that the drive shaft is maintained in accordance with its design and engineering specifications, maximizing its lifespan and performance.
By implementing these essential maintenance practices, operators can significantly prolong the lifespan of PTO drive shafts. Regular lubrication, inspections, torque checks, alignment checks, timely replacement of safety features, proper shielding and guarding, environmental protection, and adherence to manufacturer’s guidelines all contribute to the drive shaft’s longevity, reliability, and safe operation.
What safety precautions should be followed when working with PTO drive shafts?
Working with PTO (Power Take-Off) drive shafts requires strict adherence to safety precautions to prevent accidents and ensure the well-being of individuals operating or maintaining the equipment. Here are some important safety precautions to follow when working with PTO drive shafts:
1. Read and Understand the Manufacturer’s Instructions:
Before working with PTO drive shafts, carefully read and understand the manufacturer’s instructions, operating manuals, and safety guidelines. Familiarize yourself with the specific requirements and recommendations for the PTO drive shaft model being used. The manufacturer’s instructions provide essential information regarding installation, operation, maintenance, and safety precautions.
2. Wear Appropriate Personal Protective Equipment (PPE):
Always wear the necessary personal protective equipment (PPE) when working with PTO drive shafts. This may include safety glasses, protective gloves, steel-toed boots, and appropriate clothing. PPE helps protect against potential hazards such as flying debris, entanglement, or contact with rotating components.
3. Ensure Proper Installation and Alignment:
Follow the recommended installation procedures for the PTO drive shaft. Ensure that it is correctly aligned and securely attached to both the power source and the driven equipment. Improper installation or misalignment can lead to excessive vibration, premature wear, and potential dislodgement of the drive shaft during operation.
4. Use Safety Guards and Shields:
PTO drive shafts should be equipped with appropriate safety guards and shields. These protective devices help prevent accidental contact with rotating components and minimize the risk of entanglement. Ensure that the guards and shields are properly installed and in good working condition. Do not remove or bypass them during operation.
5. Avoid Loose Clothing, Jewelry, and Hair:
When working with PTO drive shafts, avoid wearing loose clothing, jewelry, or having long hair that can get entangled in the rotating components. Secure or remove any loose items that could pose a risk of entanglement or become caught in the drive shaft during operation.
6. Disconnect Power Before Maintenance:
Prior to performing any maintenance or inspection on the PTO drive shaft, ensure that the power source is completely shut off and the equipment is at a complete stop. Disconnect the power supply and take appropriate measures to prevent accidental startup, such as locking out and tagging out the power source.
7. Regularly Inspect and Maintain the Drive Shaft:
Regularly inspect the PTO drive shaft for signs of wear, damage, or misalignment. Check for loose or missing components, and ensure that all fasteners and connections are secure. Lubricate the drive shaft as recommended by the manufacturer. Promptly address any maintenance or repair needs to prevent further damage or potential safety hazards.
8. Be Cautious of Overload and Shock Loads:
Avoid subjecting the PTO drive shaft to excessive loads or sudden shock loads beyond its rated capacity. Overloading can lead to premature wear, component failure, and potential accidents. Ensure that the equipment being driven by the PTO drive shaft does not exceed its recommended load limits.
9. Provide Training and Awareness:
Ensure that individuals working with or around PTO drive shafts receive proper training and are aware of the associated risks and safety precautions. Training should cover installation procedures, safe operation, maintenance practices, and emergency procedures. Promote a safety-conscious culture and encourage reporting of any safety concerns or incidents.
10. Seek Professional Assistance When Needed:
If you’re unsure about any aspect of working with PTO drive shafts or encounter complex maintenance or repair needs, seek professional assistance. Consulting with qualified technicians, engineers, or the equipment manufacturer can help ensure that the work is carried out safely and effectively.
Remember, safety should always be the top priority when working with PTO drive shafts. Following these precautions helps minimize the risk of accidents, injuries, and equipment damage. It is essential to stay vigilant, exercise caution, and comply with relevant safety regulations and standards.
What benefits do PTO drive shafts offer for various types of machinery?
PTO (Power Take-Off) drive shafts offer several benefits for various types of machinery in agricultural and industrial applications. They play a critical role in transferring power from a primary power source, such as a tractor or engine, to different types of machinery and equipment. Here’s a detailed explanation of the benefits provided by PTO drive shafts:
1. Versatility:
PTO drive shafts enhance the versatility of machinery by allowing them to be powered by a wide range of power sources. Tractors, engines, or other primary power sources can be used to provide rotational power, which can then be transferred through the PTO drive shaft to different types of machinery. This versatility enables the same power source to be utilized for various tasks and applications.
2. Increased Efficiency:
By utilizing a PTO drive shaft, machinery can tap into the power generated by a primary power source, such as a tractor’s engine, without the need for a separate engine or power supply. This eliminates the need for additional fuel consumption and maintenance associated with multiple power sources, leading to increased overall efficiency and reduced operating costs.
3. Cost-Effectiveness:
PTO drive shafts offer a cost-effective solution for powering machinery. Instead of investing in separate engines or power units for each piece of equipment, machinery can be directly connected to a primary power source with the use of a PTO drive shaft. This reduces the capital investment required for additional power sources and improves cost efficiency in the long run.
4. Ease of Installation and Operation:
PTO drive shafts are designed for easy installation and operation. They typically feature a standardized connection system, allowing for quick and simple attachment to the power source and machinery. This ease of installation and operation saves time and effort during equipment setup and ensures smooth integration between the power source and machinery.
5. Flexibility and Interchangeability:
PTO drive shafts offer flexibility and interchangeability between different implements and machinery. As long as the machinery has a compatible PTO input connection, it can be easily connected to the PTO drive shaft. This allows for quick swapping of implements and machinery, making it convenient to adapt to changing tasks and operational requirements.
6. Power Adjustability:
PTO drive shafts provide the ability to adjust the power output to machinery. Tractors or power sources typically have multiple PTO speed settings, allowing operators to match the rotational speed and power requirements of the machinery being driven. This adjustability ensures optimal performance and prevents damage to the machinery due to excessive or insufficient power.
7. Maintenance and Safety:
PTO drive shafts generally require less maintenance compared to separate engines or power units. They are designed for durability and reliability, with proper lubrication and periodic inspection being the main maintenance requirements. Additionally, PTO drive shafts can be equipped with safety features such as guards or shields to protect operators from potential hazards associated with rotating components.
8. Compatibility with Various Machinery:
PTO drive shafts are compatible with a wide range of machinery and equipment used in agricultural and industrial applications. They can power different types of implements, such as mowers, balers, tillers, harvesters, pumps, and generators, making them suitable for various tasks and industries.
Overall, PTO drive shafts offer numerous benefits for various types of machinery. They enhance versatility, increase efficiency, reduce costs, and provide ease of installation and operation. With their flexibility, adjustability, and compatibility, PTO drive shafts play a vital role in powering machinery and improving overall productivity in agricultural and industrial operations.
editor by CX 2024-01-25
