Deskripsi Produk
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Deskripsi Produk
Poros Penggerak Daya (PTO shaft) adalah perangkat mekanis yang digunakan untuk mentransmisikan daya dari traktor atau sumber daya lain ke alat yang terpasang, seperti mesin pemotong rumput, mesin pengolah tanah, atau mesin pengepak jerami. Biasanya terletak di bagian belakang traktor, poros PTO digerakkan oleh mesin traktor melalui transmisi.
Tujuan utama poros PTO adalah untuk memasok sumber daya putar ke alat pertanian, sehingga memungkinkan alat tersebut menjalankan fungsinya. Untuk menghubungkan alat pertanian ke poros PTO, digunakan sambungan universal, yang memungkinkan pergerakan antara traktor dan alat pertanian sambil mempertahankan transfer daya yang konsisten.
Berikut adalah keunggulan kami dibandingkan dengan produk serupa dari Tiongkok:
1. Penyangga tempa membuat poros PTO cukup kuat untuk digunakan dan dioperasikan;
2. Ukuran internal standar untuk memastikan pemasangan berjalan lancar;
3. Sertifikat CE dan ISO untuk menjamin kualitas barang kami;
4. Kemasan yang kuat dan profesional untuk memastikan kondisi barang tetap baik saat Anda menerimanya.
Spesifikasi Produk
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Pengemasan & Pengiriman
Profil Perusahaan
HangZhou Hanon Technology Co.,ltd adalah perusahaan modern yang mengkhususkan diri dalam pengembangan, produksi, penjualan, dan layanan suku cadang pertanian seperti poros PTO dan gearbox, serta suku cadang hidrolik seperti silinder, katup, pompa roda gigi, dan motor, dll.
Kami berpegang pada prinsip ”Kualitas Tinggi, Kepuasan Pelanggan”, menggunakan teknologi dan peralatan canggih untuk memastikan semua standar teknis transmisi. Kami mengikuti prinsip mengutamakan manusia, berusaha sebaik mungkin untuk menciptakan lingkungan yang menyenangkan dan platform kinerja bagi setiap karyawan. Sehingga setiap orang dapat secara sadar aktif bergabung dengan Hanon Machinery.
Pertanyaan yang Sering Diajukan (FAQ)
1. APA SYARAT PEMBAYARANNYA?
Saat kami memberikan penawaran harga, kami akan mengkonfirmasi kepada Anda cara transaksinya, seperti FOB, CIF, dll.<br> Untuk barang produksi massal, Anda perlu membayar uang muka 30% sebelum produksi dan sisa pembayaran 70% setelah menerima salinan dokumen. Cara yang paling umum adalah melalui T/T.
2. BAGAIMANA CARA MENGANTARKAN BARANG KEPADA KAMI?
Biasanya kami akan mengirimkan barang kepada Anda melalui jalur laut.
3.HOE LONG IS YOUR DELIVERY TIME AND SHIPMENT?
30-45 hari.
Other Products
/* 10 Maret 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Jenis: | Poros PTO |
|---|---|
| Penggunaan: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| Bahan: | Baja 45 crore |
| Contoh: |
US$ 20/Buah
1 Buah (Minimum Pemesanan) | Pesan Sampel |
|---|
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Biaya Pengiriman:
Perkiraan biaya pengiriman per unit. |
tentang biaya pengiriman dan perkiraan waktu pengiriman. |
|---|
| Metode Pembayaran: |
|
|---|---|
|
Pembayaran Awal Pembayaran Penuh |
| Mata uang: | US$ |
|---|
| Pengembalian & Penggantian Dana: | Anda dapat mengajukan pengembalian dana hingga 30 hari setelah menerima produk. |
|---|
What maintenance practices are essential for prolonging the lifespan of PTO drive shafts?
To prolong the lifespan and ensure the optimal performance of PTO (Power Take-Off) drive shafts, regular maintenance practices are essential. By following these maintenance practices, operators can prevent premature wear, identify potential issues early on, and maximize the longevity of the drive shaft. Here are some key maintenance practices to consider:
1. Lubrication:
Proper lubrication is crucial for the smooth operation and longevity of PTO drive shafts. Regularly lubricate the drive shaft’s universal joints, splines, and other moving parts as per the manufacturer’s recommendations. Choose a high-quality lubricant suitable for the specific application and environmental conditions. Lubrication helps reduce friction, prevent excessive wear, and protect against corrosion.
2. Inspection:
Regular visual inspections are important for identifying any signs of wear, damage, or misalignment in the PTO drive shaft. Inspect the drive shaft and its components for cracks, dents, loose bolts, or signs of excessive wear. Pay attention to the universal joints, splines, shielding, and safety features. If any issues are detected, take prompt action to rectify them to prevent further damage and ensure safe operation.
3. Torque Checks:
Periodically check the torque on fasteners, such as bolts and nuts, that secure the PTO drive shaft and its components. Vibrations and normal operation can cause these fasteners to loosen over time, potentially leading to misalignment or damage. Use a torque wrench to ensure that the fasteners are properly tightened according to the manufacturer’s specifications. Regular torque checks help maintain the integrity and stability of the drive shaft assembly.
4. Alignment:
Maintaining proper alignment between the PTO drive shaft, the primary power source, and the implement is essential for efficient power transfer and preventing excessive wear. Check the alignment of the drive shaft regularly, ensuring that it is straight and properly seated in its connections. Misalignment can cause vibration, increased stress, and premature failure. Make adjustments as necessary to achieve proper alignment.
5. Shear Pin or Torque Limiter Replacement:
If the PTO drive shaft is equipped with a shear pin or torque limiter as a safety feature, it is important to replace these components when they have been activated or damaged. Shear pins are sacrificial components that break under excessive torque, protecting the drive shaft and connected equipment. Replace the shear pin or torque limiter with the correct type and specifications recommended by the manufacturer to ensure continued safety and proper function.
6. Shielding and Guarding:
Inspect the shielding and guarding of the PTO drive shaft regularly to ensure they are intact and in good condition. These protective covers are designed to prevent contact with moving parts and reduce the risk of entanglement or injury. Replace any damaged or missing shielding promptly to maintain operator safety and prevent debris from entering the drive shaft assembly.
7. Environmental Protection:
Consider the environmental conditions in which the PTO drive shaft operates and take appropriate measures to protect it. If the drive shaft is exposed to moisture, dirt, or corrosive substances, clean it regularly and apply appropriate coatings or protective measures to prevent rust and corrosion. Additionally, ensure that the drive shaft is stored in a dry and clean environment when not in use.
8. Manufacturer’s Guidelines:
Follow the maintenance guidelines provided by the manufacturer of the PTO drive shaft. These guidelines may include specific maintenance intervals, recommended lubricants, torque specifications, and other important instructions. Adhering to the manufacturer’s guidelines ensures that the drive shaft is maintained in accordance with its design and engineering specifications, maximizing its lifespan and performance.
By implementing these essential maintenance practices, operators can significantly prolong the lifespan of PTO drive shafts. Regular lubrication, inspections, torque checks, alignment checks, timely replacement of safety features, proper shielding and guarding, environmental protection, and adherence to manufacturer’s guidelines all contribute to the drive shaft’s longevity, reliability, and safe operation.
Apa saja tindakan pencegahan keselamatan yang harus diikuti saat bekerja dengan poros penggerak PTO?
Bekerja dengan poros penggerak PTO (Power Take-Off) memerlukan kepatuhan ketat terhadap tindakan pencegahan keselamatan untuk mencegah kecelakaan dan memastikan kesejahteraan individu yang mengoperasikan atau memelihara peralatan tersebut. Berikut beberapa tindakan pencegahan keselamatan penting yang harus diikuti saat bekerja dengan poros penggerak PTO:
1. Baca dan Pahami Petunjuk dari Produsen:
Sebelum mengerjakan poros penggerak PTO, bacalah dan pahami dengan saksama petunjuk pabrikan, manual pengoperasian, dan pedoman keselamatan. Pahami persyaratan dan rekomendasi khusus untuk model poros penggerak PTO yang digunakan. Petunjuk pabrikan memberikan informasi penting mengenai pemasangan, pengoperasian, perawatan, dan tindakan pencegahan keselamatan.
2. Kenakan Alat Pelindung Diri (APD) yang Sesuai:
Selalu kenakan alat pelindung diri (APD) yang diperlukan saat bekerja dengan poros penggerak PTO. Ini mungkin termasuk kacamata pengaman, sarung tangan pelindung, sepatu bot berujung baja, dan pakaian yang sesuai. APD membantu melindungi dari potensi bahaya seperti serpihan yang beterbangan, terjerat, atau kontak dengan komponen yang berputar.
3. Pastikan Pemasangan dan Penyelarasan yang Tepat:
Ikuti prosedur pemasangan yang direkomendasikan untuk poros penggerak PTO. Pastikan poros tersebut sejajar dengan benar dan terpasang dengan aman ke sumber daya dan peralatan yang digerakkan. Pemasangan yang tidak tepat atau ketidaksejajaran dapat menyebabkan getaran berlebihan, keausan dini, dan potensi terlepasnya poros penggerak selama pengoperasian.
4. Gunakan Pelindung dan Perisai Keselamatan:
Poros penggerak PTO harus dilengkapi dengan pelindung dan penutup pengaman yang sesuai. Perangkat pelindung ini membantu mencegah kontak yang tidak disengaja dengan komponen yang berputar dan meminimalkan risiko tersangkut. Pastikan pelindung dan penutup terpasang dengan benar dan dalam kondisi kerja yang baik. Jangan melepas atau melewatinya selama pengoperasian.
5. Hindari Pakaian, Perhiasan, dan Rambut yang Longgar:
Saat bekerja dengan poros penggerak PTO, hindari mengenakan pakaian longgar, perhiasan, atau memiliki rambut panjang yang dapat tersangkut pada komponen yang berputar. Amankan atau singkirkan barang-barang longgar yang dapat menimbulkan risiko tersangkut atau terperangkap di poros penggerak selama pengoperasian.
6. Putuskan Aliran Listrik Sebelum Melakukan Perawatan:
Sebelum melakukan perawatan atau pemeriksaan apa pun pada poros penggerak PTO, pastikan sumber daya listrik benar-benar dimatikan dan peralatan dalam keadaan berhenti total. Putuskan sambungan catu daya dan ambil tindakan yang tepat untuk mencegah pengaktifan yang tidak disengaja, seperti mengunci dan memberi label pada sumber daya listrik.
7. Lakukan Pemeriksaan dan Perawatan Poros Penggerak Secara Rutin:
Periksa poros penggerak PTO secara berkala untuk mengetahui tanda-tanda keausan, kerusakan, atau ketidaksejajaran. Periksa komponen yang longgar atau hilang, dan pastikan semua pengencang dan sambungan terpasang dengan aman. Lumasi poros penggerak sesuai rekomendasi pabrikan. Segera atasi kebutuhan perawatan atau perbaikan untuk mencegah kerusakan lebih lanjut atau potensi bahaya keselamatan.
8. Waspadai Beban Berlebih dan Beban Kejut:
Hindari membebani poros penggerak PTO dengan beban berlebihan atau beban kejut mendadak yang melebihi kapasitas nominalnya. Beban berlebih dapat menyebabkan keausan dini, kerusakan komponen, dan potensi kecelakaan. Pastikan peralatan yang digerakkan oleh poros penggerak PTO tidak melebihi batas beban yang direkomendasikan.
9. Memberikan Pelatihan dan Kesadaran:
Pastikan bahwa individu yang bekerja dengan atau di sekitar poros penggerak PTO menerima pelatihan yang memadai dan menyadari risiko serta tindakan pencegahan keselamatan yang terkait. Pelatihan harus mencakup prosedur pemasangan, pengoperasian yang aman, praktik perawatan, dan prosedur darurat. Promosikan budaya yang sadar akan keselamatan dan dorong pelaporan setiap masalah atau insiden keselamatan.
10. Carilah Bantuan Profesional Bila Diperlukan:
Jika Anda ragu tentang aspek apa pun dalam bekerja dengan poros penggerak PTO atau menghadapi kebutuhan perawatan atau perbaikan yang kompleks, carilah bantuan profesional. Berkonsultasi dengan teknisi, insinyur, atau produsen peralatan yang berkualifikasi dapat membantu memastikan bahwa pekerjaan dilakukan dengan aman dan efektif.
Ingat, keselamatan harus selalu menjadi prioritas utama saat bekerja dengan poros penggerak PTO. Mengikuti tindakan pencegahan ini membantu meminimalkan risiko kecelakaan, cedera, dan kerusakan peralatan. Sangat penting untuk tetap waspada, berhati-hati, dan mematuhi peraturan dan standar keselamatan yang relevan.
What benefits do PTO drive shafts offer for various types of machinery?
PTO (Power Take-Off) drive shafts offer several benefits for various types of machinery in agricultural and industrial applications. They play a critical role in transferring power from a primary power source, such as a tractor or engine, to different types of machinery and equipment. Here’s a detailed explanation of the benefits provided by PTO drive shafts:
1. Versatility:
PTO drive shafts enhance the versatility of machinery by allowing them to be powered by a wide range of power sources. Tractors, engines, or other primary power sources can be used to provide rotational power, which can then be transferred through the PTO drive shaft to different types of machinery. This versatility enables the same power source to be utilized for various tasks and applications.
2. Increased Efficiency:
By utilizing a PTO drive shaft, machinery can tap into the power generated by a primary power source, such as a tractor’s engine, without the need for a separate engine or power supply. This eliminates the need for additional fuel consumption and maintenance associated with multiple power sources, leading to increased overall efficiency and reduced operating costs.
3. Cost-Effectiveness:
PTO drive shafts offer a cost-effective solution for powering machinery. Instead of investing in separate engines or power units for each piece of equipment, machinery can be directly connected to a primary power source with the use of a PTO drive shaft. This reduces the capital investment required for additional power sources and improves cost efficiency in the long run.
4. Ease of Installation and Operation:
PTO drive shafts are designed for easy installation and operation. They typically feature a standardized connection system, allowing for quick and simple attachment to the power source and machinery. This ease of installation and operation saves time and effort during equipment setup and ensures smooth integration between the power source and machinery.
5. Flexibility and Interchangeability:
PTO drive shafts offer flexibility and interchangeability between different implements and machinery. As long as the machinery has a compatible PTO input connection, it can be easily connected to the PTO drive shaft. This allows for quick swapping of implements and machinery, making it convenient to adapt to changing tasks and operational requirements.
6. Power Adjustability:
PTO drive shafts provide the ability to adjust the power output to machinery. Tractors or power sources typically have multiple PTO speed settings, allowing operators to match the rotational speed and power requirements of the machinery being driven. This adjustability ensures optimal performance and prevents damage to the machinery due to excessive or insufficient power.
7. Maintenance and Safety:
PTO drive shafts generally require less maintenance compared to separate engines or power units. They are designed for durability and reliability, with proper lubrication and periodic inspection being the main maintenance requirements. Additionally, PTO drive shafts can be equipped with safety features such as guards or shields to protect operators from potential hazards associated with rotating components.
8. Compatibility with Various Machinery:
PTO drive shafts are compatible with a wide range of machinery and equipment used in agricultural and industrial applications. They can power different types of implements, such as mowers, balers, tillers, harvesters, pumps, and generators, making them suitable for various tasks and industries.
Overall, PTO drive shafts offer numerous benefits for various types of machinery. They enhance versatility, increase efficiency, reduce costs, and provide ease of installation and operation. With their flexibility, adjustability, and compatibility, PTO drive shafts play a vital role in powering machinery and improving overall productivity in agricultural and industrial operations.
editor by CX 2024-01-25
