Produktbeskrivning
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Produktbeskrivning
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Förpackning och frakt
Företagsprofil
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
Vanliga frågor
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.HOE LONG IS YOUR DELIVERY TIME AND SHIPMENT?
30-45days.
Other Products
/* 10 mars 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/)))
| Typ: | Kraftuttagsaxel |
|---|---|
| Användande: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| Material: | 45cr Steel |
| Prover: |
US$ 20/Styck
1 styck (minsta beställning) | Beställ prov |
|---|
| Anpassning: |
Tillgänglig
| Anpassad förfrågan |
|---|
.shipping-cost-tm .tm-status-off{bakgrund: ingen;fyllning: 0;färg: #1470cc}
|
Fraktkostnad:
Beräknad frakt per enhet. |
om fraktkostnad och beräknad leveranstid. |
|---|
| Betalningsmetod: |
|
|---|---|
|
Första betalningen Full betalning |
| Valuta: | US$ |
|---|
| Retur och återbetalning: | Du kan ansöka om återbetalning upp till 30 dagar efter att du mottagit produkterna. |
|---|
Vilka underhållsrutiner är viktiga för att förlänga livslängden på kraftuttagsaxlar?
För att förlänga livslängden och säkerställa optimal prestanda för kraftuttagsaxlar (PTO) är regelbundet underhåll avgörande. Genom att följa dessa underhållsrutiner kan förare förhindra för tidigt slitage, identifiera potentiella problem tidigt och maximera drivaxelns livslängd. Här är några viktiga underhållsrutiner att tänka på:
1. Smörjning:
Korrekt smörjning är avgörande för smidig drift och livslängd hos kraftuttagsaxlar. Smörj regelbundet drivaxelns universalkopplingar, splines och andra rörliga delar enligt tillverkarens rekommendationer. Välj ett högkvalitativt smörjmedel som är lämpligt för den specifika tillämpningen och miljöförhållandena. Smörjning hjälper till att minska friktion, förhindra överdrivet slitage och skydda mot korrosion.
2. Inspektion:
Regelbundna visuella inspektioner är viktiga för att identifiera tecken på slitage, skador eller feljustering i kraftuttagsaxeln. Inspektera kraftuttagsaxeln och dess komponenter för sprickor, bucklor, lösa bultar eller tecken på kraftigt slitage. Var uppmärksam på universalkopplingar, splines, skärmning och säkerhetsfunktioner. Om några problem upptäcks, vidta omedelbara åtgärder för att åtgärda dem för att förhindra ytterligare skador och säkerställa säker drift.
3. Momentkontroller:
Kontrollera regelbundet åtdragningsmomentet på fästelement, såsom bultar och muttrar, som håller fast kraftuttagsaxeln och dess komponenter. Vibrationer och normal drift kan göra att dessa fästelement lossnar med tiden, vilket kan leda till feljustering eller skador. Använd en momentnyckel för att säkerställa att fästelementen är ordentligt åtdragna enligt tillverkarens specifikationer. Regelbundna åtdragningskontroller hjälper till att bibehålla drivaxelns integritet och stabilitet.
4. Uppriktning:
Att upprätthålla korrekt uppriktning mellan kraftuttagsaxeln, den primära kraftkällan och redskapet är avgörande för effektiv kraftöverföring och för att förhindra överdrivet slitage. Kontrollera drivaxelns uppriktning regelbundet och se till att den är rak och korrekt monterad i sina anslutningar. Felaktig uppriktning kan orsaka vibrationer, ökad belastning och för tidigt haveri. Gör justeringar vid behov för att uppnå korrekt uppriktning.
5. Byte av brytstift eller momentbegränsare:
Om kraftuttagsaxeln är utrustad med en brytstift eller momentbegränsare som säkerhetsfunktion är det viktigt att byta ut dessa komponenter när de har aktiverats eller skadats. Brystift är offerkomponenter som går sönder vid för högt vridmoment och skyddar drivaxeln och ansluten utrustning. Byt ut brytstiftet eller momentbegränsaren mot rätt typ och med rätt specifikationer som rekommenderas av tillverkaren för att säkerställa fortsatt säkerhet och korrekt funktion.
6. Avskärmning och skydd:
Inspektera regelbundet kraftuttagsaxelns skärmning och skydd för att säkerställa att de är intakta och i gott skick. Dessa skyddskåpor är utformade för att förhindra kontakt med rörliga delar och minska risken för intrassling eller skada. Byt ut skadade eller saknade skärmningar omedelbart för att upprätthålla förarens säkerhet och förhindra att skräp kommer in i kraftuttagsaxeln.
7. Miljöskydd:
Tänk på de miljöförhållanden där kraftuttagsaxeln arbetar och vidta lämpliga åtgärder för att skydda den. Om kraftuttagsaxeln utsätts för fukt, smuts eller frätande ämnen, rengör den regelbundet och applicera lämpliga beläggningar eller skyddsåtgärder för att förhindra rost och korrosion. Se dessutom till att kraftuttagsaxeln förvaras i en torr och ren miljö när den inte används.
8. Tillverkarens riktlinjer:
Följ underhållsanvisningarna från tillverkaren av kraftuttagsaxeln. Dessa riktlinjer kan inkludera specifika underhållsintervall, rekommenderade smörjmedel, åtdragningsmomentspecifikationer och andra viktiga instruktioner. Genom att följa tillverkarens riktlinjer säkerställs att kraftuttagsaxeln underhålls i enlighet med dess konstruktions- och tekniska specifikationer, vilket maximerar dess livslängd och prestanda.
Genom att implementera dessa viktiga underhållsrutiner kan operatörer avsevärt förlänga livslängden på kraftuttagsaxlarna. Regelbunden smörjning, inspektioner, vridmomentkontroller, uppriktningskontroller, snabba utbyten av säkerhetsfunktioner, korrekt avskärmning och skydd, miljöskydd och efterlevnad av tillverkarens riktlinjer bidrar alla till kraftuttagsaxelns livslängd, tillförlitlighet och säkra drift.
What safety precautions should be followed when working with PTO drive shafts?
Working with PTO (Power Take-Off) drive shafts requires strict adherence to safety precautions to prevent accidents and ensure the well-being of individuals operating or maintaining the equipment. Here are some important safety precautions to follow when working with PTO drive shafts:
1. Read and Understand the Manufacturer’s Instructions:
Before working with PTO drive shafts, carefully read and understand the manufacturer’s instructions, operating manuals, and safety guidelines. Familiarize yourself with the specific requirements and recommendations for the PTO drive shaft model being used. The manufacturer’s instructions provide essential information regarding installation, operation, maintenance, and safety precautions.
2. Wear Appropriate Personal Protective Equipment (PPE):
Always wear the necessary personal protective equipment (PPE) when working with PTO drive shafts. This may include safety glasses, protective gloves, steel-toed boots, and appropriate clothing. PPE helps protect against potential hazards such as flying debris, entanglement, or contact with rotating components.
3. Ensure Proper Installation and Alignment:
Follow the recommended installation procedures for the PTO drive shaft. Ensure that it is correctly aligned and securely attached to both the power source and the driven equipment. Improper installation or misalignment can lead to excessive vibration, premature wear, and potential dislodgement of the drive shaft during operation.
4. Use Safety Guards and Shields:
PTO drive shafts should be equipped with appropriate safety guards and shields. These protective devices help prevent accidental contact with rotating components and minimize the risk of entanglement. Ensure that the guards and shields are properly installed and in good working condition. Do not remove or bypass them during operation.
5. Avoid Loose Clothing, Jewelry, and Hair:
When working with PTO drive shafts, avoid wearing loose clothing, jewelry, or having long hair that can get entangled in the rotating components. Secure or remove any loose items that could pose a risk of entanglement or become caught in the drive shaft during operation.
6. Disconnect Power Before Maintenance:
Prior to performing any maintenance or inspection on the PTO drive shaft, ensure that the power source is completely shut off and the equipment is at a complete stop. Disconnect the power supply and take appropriate measures to prevent accidental startup, such as locking out and tagging out the power source.
7. Regularly Inspect and Maintain the Drive Shaft:
Regularly inspect the PTO drive shaft for signs of wear, damage, or misalignment. Check for loose or missing components, and ensure that all fasteners and connections are secure. Lubricate the drive shaft as recommended by the manufacturer. Promptly address any maintenance or repair needs to prevent further damage or potential safety hazards.
8. Be Cautious of Overload and Shock Loads:
Avoid subjecting the PTO drive shaft to excessive loads or sudden shock loads beyond its rated capacity. Overloading can lead to premature wear, component failure, and potential accidents. Ensure that the equipment being driven by the PTO drive shaft does not exceed its recommended load limits.
9. Provide Training and Awareness:
Ensure that individuals working with or around PTO drive shafts receive proper training and are aware of the associated risks and safety precautions. Training should cover installation procedures, safe operation, maintenance practices, and emergency procedures. Promote a safety-conscious culture and encourage reporting of any safety concerns or incidents.
10. Seek Professional Assistance When Needed:
If you’re unsure about any aspect of working with PTO drive shafts or encounter complex maintenance or repair needs, seek professional assistance. Consulting with qualified technicians, engineers, or the equipment manufacturer can help ensure that the work is carried out safely and effectively.
Remember, safety should always be the top priority when working with PTO drive shafts. Following these precautions helps minimize the risk of accidents, injuries, and equipment damage. It is essential to stay vigilant, exercise caution, and comply with relevant safety regulations and standards.
What benefits do PTO drive shafts offer for various types of machinery?
PTO (Power Take-Off) drive shafts offer several benefits for various types of machinery in agricultural and industrial applications. They play a critical role in transferring power from a primary power source, such as a tractor or engine, to different types of machinery and equipment. Here’s a detailed explanation of the benefits provided by PTO drive shafts:
1. Versatility:
PTO drive shafts enhance the versatility of machinery by allowing them to be powered by a wide range of power sources. Tractors, engines, or other primary power sources can be used to provide rotational power, which can then be transferred through the PTO drive shaft to different types of machinery. This versatility enables the same power source to be utilized for various tasks and applications.
2. Increased Efficiency:
By utilizing a PTO drive shaft, machinery can tap into the power generated by a primary power source, such as a tractor’s engine, without the need for a separate engine or power supply. This eliminates the need for additional fuel consumption and maintenance associated with multiple power sources, leading to increased overall efficiency and reduced operating costs.
3. Cost-Effectiveness:
PTO drive shafts offer a cost-effective solution for powering machinery. Instead of investing in separate engines or power units for each piece of equipment, machinery can be directly connected to a primary power source with the use of a PTO drive shaft. This reduces the capital investment required for additional power sources and improves cost efficiency in the long run.
4. Ease of Installation and Operation:
PTO drive shafts are designed for easy installation and operation. They typically feature a standardized connection system, allowing for quick and simple attachment to the power source and machinery. This ease of installation and operation saves time and effort during equipment setup and ensures smooth integration between the power source and machinery.
5. Flexibility and Interchangeability:
PTO drive shafts offer flexibility and interchangeability between different implements and machinery. As long as the machinery has a compatible PTO input connection, it can be easily connected to the PTO drive shaft. This allows for quick swapping of implements and machinery, making it convenient to adapt to changing tasks and operational requirements.
6. Power Adjustability:
PTO drive shafts provide the ability to adjust the power output to machinery. Tractors or power sources typically have multiple PTO speed settings, allowing operators to match the rotational speed and power requirements of the machinery being driven. This adjustability ensures optimal performance and prevents damage to the machinery due to excessive or insufficient power.
7. Maintenance and Safety:
PTO drive shafts generally require less maintenance compared to separate engines or power units. They are designed for durability and reliability, with proper lubrication and periodic inspection being the main maintenance requirements. Additionally, PTO drive shafts can be equipped with safety features such as guards or shields to protect operators from potential hazards associated with rotating components.
8. Compatibility with Various Machinery:
PTO drive shafts are compatible with a wide range of machinery and equipment used in agricultural and industrial applications. They can power different types of implements, such as mowers, balers, tillers, harvesters, pumps, and generators, making them suitable for various tasks and industries.
Overall, PTO drive shafts offer numerous benefits for various types of machinery. They enhance versatility, increase efficiency, reduce costs, and provide ease of installation and operation. With their flexibility, adjustability, and compatibility, PTO drive shafts play a vital role in powering machinery and improving overall productivity in agricultural and industrial operations.
editor by CX 2024-01-25
