विवरण
What Is the SWC440BH-1500 Universal Cardan Drive Shaft?
The SWC440BH-1500 is a heavy-duty universal cardan drive shaft built to the SWC BH (Bolted Head) series standard — a flange-welded cross-shaft design widely adopted in the steel and metalworking sector. With a 440 mm nominal diameter and a 1,500 mm standard installation length, this cardan shaft is specifically rated to transmit high rotational torque between non-collinear shafts, making it the preferred choice for four-roller cold rolling mills, two-high reversing mills, and continuous section steel rolling lines operating across the United Kingdom and broader European markets. The shaft accommodates working angles up to 15° (with rated torque adjustment), offering outstanding flexibility in equipment alignment without sacrificing power transmission efficiency.
Unlike lightweight or medium-duty alternatives, the SWC440BH-1500 is engineered from high-grade alloy steel and precision-machined yoke forgings, ensuring resistance to fatigue cracking, impact shock, and prolonged cyclic loading — all conditions that characterise multi-stand rolling mill environments. UK steel processors and rolling mill operators dealing with high-tonnage coil production, plate rolling, or wire rod lines will find this cardan shaft delivers measurable gains in uptime and reduced maintenance frequency compared to older-generation cross-joint couplings.
तकनीकी विनिर्देश
| पैरामीटर | मूल्य / विनिर्देश |
|---|---|
| Model | SWC440BH-1500 |
| Nominal Diameter (D) | 440 mm |
| Installation Length (L) | 1500 mm |
| Rated Torque (Tn) | 90,000 N·m |
| Fatigue Torque (Tf) | 45,000 N·m |
| Maximum Working Angle (β max) | 15° |
| Flange Bolt Circle Diameter (Lk) | 395 mm |
| Flange Outer Diameter (Df) | 440 mm |
| Number of Flange Bolts | 16 |
| Bearing Cup Diameter | 105 mm |
| Material — Shaft Tube | 20CrMnTi / 42CrMo4 Alloy Steel |
| Material — Yoke / Flange | Forged 42CrMo4, Heat-Treated |
| सतह का उपचार | Zinc-Phosphate + Epoxy Primer, or Custom |
| Rotation Speed (max) | 600 rpm (at 0° – 5° angle) |
| स्नेहन | Grease Nipple, Centralised Lube Compatible |
| मानक | GB/T 5901, JB/T 3241 |
| Approx. Weight | Approx. 820 kg (varies with bore/customisation) |
| Primary Application | Four-Roller Cold Rolling Mill, Two-High Reversing Mill, Section Rolling Line |
How It Works: Transmission Principle & Material Engineering
Universal Joint Mechanism
The SWC440BH-1500 uses a double-Hooke universal joint arrangement — two cross-shaft journal assemblies connected via an intermediate tube. When the input and output shafts are offset angularly, the yoke forks and cross-pin bearings transmit rotational motion continuously, cancelling out velocity variation (with equal and opposite working angles) to deliver smooth, near-constant torque output. This principle allows the rolling mill drive motor to remain in a fixed position while the rolling rolls move or shift during gauge adjustment, a typical operational requirement in four-roller cold rolling mill configurations across UK steel service centres.
Material Selection & Heat Treatment
The shaft tube is manufactured from seamless 42CrMo4 chromium-molybdenum alloy steel, selected for its excellent strength-to-weight ratio and toughness under reversing fatigue loads. Yoke forgings and flange plates are precision-forged from the same grade and subjected to quench-and-temper heat treatment, raising yield strength to 900 MPa or above. Cross-shaft journals are hardened to 58–62 HRC via case hardening and precision-ground to H6/h5 tolerance. All mating surfaces receive zinc-phosphate pretreatment followed by an epoxy primer coat — a combination that provides robust corrosion resistance suited to mill scale environments, hydraulic oil exposure, and coolant splash common in British rolling mill halls.
Application Scenarios in Rolling Mills
The SWC440BH-1500 finds its primary home in four-roller cold rolling mills where work rolls and backup rolls must be independently driven at high torque without rigid shaft alignment. Beyond cold rolling, this universal cardan drive shaft is also deployed in two-high and three-high hot rolling stands, wire rod finishing blocks, plate levellers, and straightening machines. UK steel processors manufacturing automotive sheet, structural section, or precision tube commonly specify the SWC BH series for main drive spindle duties. The shaft also suits coiler drum drives and descaler pump gearbox connections where high cyclic torque and angular flexibility are both critical requirements.
Key Advantages of the SWC440BH-1500
Rated Torque 90,000 N·m
Handles the full drive load of large-diameter cold rolling mill spindles without torque slip or fatigue failure, even under peak reversal loads.
±15° Angular Misalignment
Comfortably accommodates roll gap changes and equipment settlement without imposing bending loads on motor or gearbox bearings — critical for long bearing life in rolling stands.
Bolted Flange — Tool-Free Swap
BH-type bolted flange connection enables fast cross-shaft replacement during scheduled shutdowns, reducing planned maintenance downtime on UK rolling lines by up to 40% versus welded designs.
Forged Alloy Steel Construction
Each yoke, flange, and cross-journal is forged — not cast — from 42CrMo4 alloy, providing a minimum 30% higher fatigue resistance than cast equivalents and verified by material certification on each batch.
Full Custom Dimension Service
Non-standard bore diameters, flange drilling patterns, extended or shortened lengths, and special coatings are all available to order — key for retrofit projects on existing UK rolling mill installations.
Customer Success Stories
Real-world performance across UK & European metalworking operations
Sheffield Steel Service Centre — Four-Roller Cold Rolling Mill Retrofit
A major Sheffield-based steel service centre operating a 4-roller cold rolling mill for automotive strip steel was experiencing repeated spindle failures on its legacy drive shafts — averaging one unplanned shutdown per quarter, with each event costing over £28,000 in lost production. After switching to SWC440BH-1500 universal cardan drive shafts on both the top and bottom work roll drives in early 2024, the facility completed an uninterrupted 14-month production run without a single spindle-related stoppage. The maintenance team reported the bolted flange design allowed their in-house engineers to replace cross-shaft kits during routine weekend shutdowns in under four hours, compared to two full days previously required with the welded-type shafts. Material certification and dimensional drawings supplied with the order fully satisfied the site’s ISO 9001 audit requirements.
4-Roller Cold Rolling
14 Months Zero Downtime
Sheffield, UK
“We replaced worn-out cardan shafts on our two-high reversing mill in Rotherham. The SWC440BH arrived with full dimensional inspection reports, fitted perfectly, and has been running at 420 rpm under full torque for eight months without any grease seal issues. Delivery to South Yorkshire was faster than we expected — four weeks from order confirmation.”
Maintenance Director · Specialty Long Products · Rotherham, UK
“As a precision tube manufacturer in the West Midlands, we need drive shafts that can tolerate continuous angle changes as the mandrel bar moves. The SWC440BH-1500 handles our 12° working angle without vibration or noise, and the 16-bolt flange pattern matched our existing mill standard exactly. Good supplier, competitive price, and responsive technical support.”
Plant Engineer · Precision Tube Division · West Midlands, UK
“We procure cardan drive shafts for rolling mills across Germany and the Netherlands. PTO Drive Shafts supplied SWC440BH units with custom bore sizes and full CE-compliant documentation for our German customer’s plate rolling installation. Quality matched European premium brands at a considerably better price point. We will continue to specify this range on future projects.”
Procurement Manager · Rolling Mill Equipment Supplier · Hamburg, Germany
Our Manufacturing Facility & Custom Engineering Capability
With over 20 years of experience in heavy-duty power transmission manufacturing, our facility operates CNC turning centres, deep-hole boring machines, and dynamic balancing rigs capable of handling shafts up to 600 mm diameter and 6,000 mm in length. Every SWC series cardan drive shaft undergoes dimensional inspection, hardness verification, and torque proof-testing before despatch. For UK and European rolling mill customers with non-standard requirements, our in-house engineering team provides full customisation across all key parameters — bore diameter and keyway specification, flange drilling pattern, shaft length (from 500 mm to 5,500 mm), surface finish options, and special operating environment coatings including high-temperature or marine-grade finishes.
We supply material test certificates (MTC) to EN 10204 3.1, dynamic balance reports, dimensional inspection records, and full assembly drawings with every order. Rush fabrication for emergency mill breakdown situations is available with agreed lead times; contact us to discuss your specific production schedule.
Related Industrial Cardan Drive Shaft Products
Alongside the SWC440BH-1500, our range covers a broad spectrum of SWC BH-type universal cardan drive shafts for industrial machinery. Below are two further models frequently specified alongside this product for multi-stand slitting and cut-to-length processing lines across the UK metals sector:
Industrial Cardan Drive Shaft SWC200BH
A 200 mm diameter BH-type cardan shaft designed for slitting machines and light-to-medium industrial drive applications. Compact, balanced, and available with custom bore and length to match existing slitting line spindles.
Industrial Cardan Drive Shaft SWC150BH
The SWC150BH is a 150 mm diameter BH-type universal joint shaft suited to lighter-duty slitting machines, straighteners, and roll-forming lines. Precision-machined yoke and cross-kit assembly for low backlash and long bearing life.
अक्सर पूछे जाने वाले प्रश्नों
Ready to specify the SWC440BH-1500 for your rolling mill project? Contact our engineering team for a detailed technical review and competitive quote.
जीजेडएल द्वारा संपादित
